Undertaker 480 EC Termiticide
Undertaker 480 EC is a broad-spectrum termiticide with contact, fumigant, and stomach actions used for termite control in wood buildings and construction.
Undertaker 480 EC Termiticide provides long-lasting protection against termites and other wood-destroying insects, making it one of the best termite control products in Kenya. Alternative Termite killer chemicals in Kenya that offer even longer warranty durations include Termidor 96 SC and Premise 200 SC.
Undertaker® 480EC
Undertaker 480 EC Product Details
- Available Packs: 1 L, 100 ml, 250 ml, 50 ml
- Product Type: Insecticide
- Formulation: Emulsifiable concentrate (EC)
- Active Ingredient(s): Chlorpyrifos 480 g/L
- Mode of Action: Contact
- Target (Pests/Disease/Weeds) : Termites
- Application Rate: 20 ml per litre of water
- Re-Entry Interval: 12 Hours
Undertaker 480 EC Mode of Action
Undertaker 480EC Application Guide
Achieving effective termite treatment results requires proper application of Undertaker 480 EC termite killer chemical. Here is a fast guide of using Undertaker 480 EC termite killer chemical.
- On concrete slabs under construction, treat the outside of the foundation wall trenches with 6 – 12 litres of the solution per linear meter and to the depths of 40 -75 cm. replace the soil and apply another 8 – 16 litres of the solution per linear meter and cover the trench and fill the treated soil with a thin layer of untreated soil.
- On mud floor houses under construction, treat the external surfaces of the poles’ holes with the solution to the depth of 40 – 75 cm. Dip the poles into the solution. Treat as for building under construction.
- On termite nests, remove the top 15 cm of the soil and pour the solution down the tunnels. Replace the soils after treatment.
- On lawns and gardens, spray affected areas at the rates of 1.5 litres of the solution per 10 square meters.
- On timber, use 1 L per 24 litres of water and spray the timber thoroughly. Soak mounds of the fencing poles for 30 minutes and treat the soil in holes by pouring in the solution by the watering can or bucket
- On forest trees, apply 10 – 20 ml per 1 L of water, depending on severity of termite infection, drench the base of the tree, followed by irrigation of enough water.
Undertaker® 480EC can be applied as a direct spray on construction wood and be drenched at the base of trees. DO NOT apply to soils if excessively wet, immediately after heavy rain or if heavy rains are expected within 48 hours to avoid run-off of chemical.
Benefits of using Undertaker 480 EC
- Has quick knockdown action
- Reliable termite control at an affordable cost
- Can be applied inside and outside residential places
- Biofriendly
Undertaker 480EC Fast Application Table Guide:
| Area | Use |
| Concrete slabs under construction | Treat the outside of the foundation wall trenches with 6-12 litres of the solution per linear meter and to the depths of 40 -75 cm. replace the soil and apply another 8-16 litres of the solution per linear meter and cover the trench and fill the treated soil with a thin layer of untreated soil. |
| Mud floor houses under constructions | Treat the external surfaces of the poles holes with the solution to the depth of 40-75 cm. Dip the poles into the solution. Treat as for building under construction. |
| Termites nests | Remove the top 15 cm of the soil and pour the solution down the tunnels. Replace the soils after treatment. |
| Lawn and gardens | Spray affected areas at the rates of 1.5 litres of the solution per 10 square meters |
| Timber | 1 L per 24 litres of water and spray the timber thoroughly. Soak mounds of the fencing poles for 30 minutes and treat the soil in holes by pouring in the solution by the watering can or bucket |
| Forest trees | 10-20 ml per 1 L of water, depending on severity of termite infection, drench the base of the tree, followed by irrigation of enough water |
Reviews
There are no reviews yet.